I used silicone grease spray in my wall as it took off the assembly due to the friction of rubber p

Hi, An electrician has advised me to spray all connectors between the panels with silicone ınglot spray (http://itw-scan.com/files/tds/dk/19285_tds_dk.pdf) to ensure optimal contact and prevent the entry of moisture / corrosion. Is this a good idea and there are others ınglot who have done this? Fixed: Danfoss 6KW TLX-Pro + | 35 x 250W Himin HG-250S mono panels on roofs 2 (22 and 13 panels). Due south, 15 degree slope on the roof.
Silicone can then only make the switch worse, so I would not recommend, and does not even own. The most common connector MC4 is IP protection class ip65, and that means completely moisture and dust tight, so I do not know why the electrician gives advice. Kostal 10.1 45 pcs. Longbai Solar 200W mono solar cell production ınglot Recreational pusher
The spray should not give less respect, as it apparently is recommended for this purpose. I think more about how the connection of the plug looks like after 20 years and it gets better from such a spray system: 6KW Danfoss TLX-Pro + | 35 x 250W Himin HG-250S mono panels at two roof surfaces (22 and 13 panels). Due south, 15 degree slope on the roof.
Silicone ınglot is not a leader, ınglot so it can not help the connection. The only thing it's good that it can prevent corrosion, and when the connectors are ip65, it is pointless in my opinion. Kostal 10.1 45 pcs. Longbai Solar 200W mono solar cell production Recreational pusher
I used silicone grease spray in my wall as it took off the assembly due to the friction of rubber pakningen.Det is normal. used in the auto industry. 45 pcs. Zn-shine 255w black mont. with 3 strands of 15 paneler.30 west 30degrees and 15 south approximately 40degrees. Danfoss TLX Pro + 12.5 inverter Keen 03/08/2012
(21-11-2012 16:18) holger30 Wrote: I used silicone grease spray in my wall as it took off the assembly due to the friction of rubber pakningen.Det is normal. used in the auto industry. Did you also silicone plugs into the sockets, or only on packets / slot? Fixed: Danfoss 6KW TLX-Pro + | 35 x 250W Himin HG-250S mono panels on roofs 2 (22 and 13 panels). Due south, 15 degree slope on the roof.
(21-11-2012 11:59) ajacobs ınglot Wrote: Silicone can then only make the switch worse, so I would not recommend, and does not even own. The most common connector MC4 is IP protection class ip65, and that means completely moisture and dust tight, so I do not know why the electrician gives advice. totally agree with the statement 31 units ZnShine 255w black = 7.905 kw 7 +7 +7 south, 9 west 2 pcs SMA SB3000-TL21 ınglot Member of the National Association of Photovoltaic Owners
So be sure to MC4 connectors meet density provisions. If not then buy a spray can to kr 59.50. I did, for after all it is easier than meeting up in a foreign court, where manufacturing is done. And then jacks even easier to assemble but you can only use a contact spray. Vaseline Spray. Otherwise, you may loss. I do not know if a silicone spray can also be used. mvh bentpetersson http://www.psymagine.dk Plant Info and photos http://www.suntrol-portal.com/en/page/lillekobbel
(21-11-2012 16:22) mrwee Wrote: Did you also silicone plugs into the sockets, or only on packets / slot? Both inside and pakningen.Det is my assessment that does not reduce the conductivity but only works moisture displacing and helps installation. The trucks used silicone grease often, by connectors ınglot and the like. it all comes together with a layer of silicone grease to prevent korrision which is much larger at a fixed 24v versus ınglot 12v anlæg.Uden a measurable voltage loss and even at high current styrke.På a photovoltaic installations where the voltage is high I do not think silicone damages whatsoever but may prevent tweak Oringen during ınglot montage.Så rather be safe than sorry 45 pcs. Zn-shine 255w black mont. with 3 strands of 15 paneler.30 west 30degrees and 15 south approximately 40degrees. Danfoss TLX Pro + 12.5 inverter Keen 03/08/2012
When I read Kema's description I get the clear impression that it can be used, but I have to just go with the electrician again. Kema's description: SC-4 Silicon Grease is a fatty similar silicone paste with excellent dielectric properties. Has a uniform consistency over a wide temperature range of -50 C to +200 C. Light trasparent fat is flavor and airless, crack and hardens not by aging. Weight loss due to evaporation is less than 2% after 24 hours at 200 C. Adheres to dry surfaces of metals, ceramics, rubber, PVC and all kinds of electrical insulating materials and have high surface resistance, even under extremely humid conditions, has excellent resistance to leakage current and corona. ınglot SC-4 has a special ability to encapsulate dust, dirt and the like, so that the surface is always water resistant and therefore suitable for outdoor use, for example. højspændingsisolatorer. Chemically inert, therefore suitable to protect and preserve the flexibility of natural and synthetic rubber, PVC etc. Sealing strips of rubber can not oxidize or freeze solid. B